Stony Plain
Furnace & Heating
 Services

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

Boiler heat is not expensive on a day-to-day basis. In fact, you may save in energy costs when heating your house with a boiler compared to a furnace.

However, installing a boiler is typically more complex and therefore more expensive than installing a furnace. On average, a boiler will cost anywhere from $2,500 to $10,000 to purchase and install (depending on the brand and the system’s energy efficiency rating). Plus, your home will need extensive modifications to make a boiler system work – radiant heating must be implemented.

On the other hand, the average cost to buy and install a furnace in Edmonton is only $5,500 to $10,000+. With boiler heat, you will save in the long run but will have to pay more upfront.

It can cost anywhere from $150 to $1,500 to repair a furnace, depending on the issue. If you’re in the Edmonton area, the average cost to repair a furnace will be around $700.

Make sure the furnace company you choose to do your repairs is upfront with their pricing. They should be able to provide you with the price ahead of time so that you know exactly what to expect before moving ahead!

Want to save some money? Often professional heating and plumbing companies will offer a Service Partner Plan – we call ours the ProComfort Plan. This type of plan will help you keep on top of the regular maintenance your furnace needs for a fraction of the price. Regular furnace tune-ups and maintenance will help prevent any major issues, saving you from repairs and replacements that could cost you thousands of dollars! With plans like this, there is often a discount for members, meaning you’ll save money with every visit.

It shouldn’t take a professional heating company in Edmonton too long to install a new boiler. For a simple boiler replacement, you can expect a trained professional to take between 4 and 6 hours.

Your new boiler will be up and running in less than a day. However, installing a brand new boiler, where one didn’t exist before, is a bigger job. Upgrading your current boiler to a different system or moving your boiler to a new location can also be more involved and will take a bit longer.

Because these jobs are more complex, they may take a team of professionals a few days to complete. Typically, you can expect to wait no more than a week for your new system to be up and ready!

Shopping for a new furnace and wondering what are BTUs? BTU stands for British Thermal Unit – a value traditionally assigned to heat. Technically, a single BTU is the amount of energy that is necessary to increase the temperature of one pound of water by one degree Fahrenheit at sea level. As far as a heating system goes, BTUs refer to the amount of heat that a furnace is able to output.

When it comes to furnaces, the larger the square footage that needs to be heated, the more BTUs you’ll require. For example, it’s suggested that a 1,500 square foot home has a furnace that is able to output 45,000 to 90,000 BTUs.

The size of the furnace you’ll need largely depends on the size of your home. Size recommendations based on square footage are:

1,200 square foot home: 36,000 to 72,000 BTUs
1,500 square foot home: 45,000 to 90,000 BTUs
1,800 square foot home: 54,000 to 108,000 BTUs
2,100 square foot home: 63,000 to 126,000 BTUs
2,400 square foot home: 72,000 to 144,000 BTUs

Other factors that affect the size of the new furnace installation you’ll need include:

• Climate zone (for example, Edmonton is in Climate Zone 5)
• Quality of insulation
• Window thickness
• Ceiling height
• Number of people living in your home
• Preferred temperature
• Size and state of the basement

For more info om furnace shopping, read our full article on “how to choose the right furnace“.

The average cost to install a furnace in Edmonton is between $5,500 and $10,000+. The cost depends on various factors, including brand, size, company, etc. However, with the average cost of a new furnace being around $3,000 – $6,000, you can expect to pay anywhere from $5,000 to $10,000 in total, including installation. 

Check out our Current Offers to see how you can save with deals and rebates. 

In Alberta, a heat-loss calculation must be done when installing a new furnace. When hiring a professional to do your install, this will be factored into the price.

Hiring a professional heating company to install your furnace is essential. It may cost more initially but will save you money, time, and headache in the long run.

Unless you’re a trained professional, it’s not a good idea to attempt to install your own furnace. Yes, you’ll save money now but the issues and damage that can occur from an improperly installed furnace can result in costs far beyond what you would have spent to hire professionals to do your install. 

Hiring a professional heating services provider in your area to install, maintain, and repair your furnace is always the best way to go. This will save you time and money in the long run. In addition to properly installing and calibrating your new furnace system, technicians are trained to help you find the perfect size furnace for your home. This will ensure that your furnace is not too big or too small. This, as well as the additional services provided by professional technicians during installation, including the calibration of your thermostat, will result in a highly-efficient furnace that will save you money in energy costs.