Edmonton's Trusted
Clogged Toilet Repair
Company

There are several preventive measures you can take:

• Insulate your pipes, especially those in unheated areas like basements, garages, and crawl spaces.
• Keep your home’s thermostat set to a consistent temperature, even at night and when you’re away.
• Allow faucets to drip slightly during extremely cold spells to keep water flowing.
• Open cabinet doors under sinks to allow warm air to circulate around the pipes.

In Edmonton, you can expect to pay approximately $3,000 – $7,000 for a new water heater to be installed. This estimate includes the price of a high quality hot water tank, as well as installation. Keep in mind, the cost to have a professional Edmonton plumbing services provider install a water heater in your home will depend on the complexity of the installation, and the hot water tank you choose to purchase. For a simple job in which one hot water tank is being replaced by a new tank of the same type, the labour costs will not be too high. However, if you are having a hot water heater installed in a new location or in a home that does not currently have one, you will be looking at a more difficult job and therefore a higher price.

A sump pump is an appliance that is used to help prevent flooding in your home. If you’re in a flood zone and your basement floods regularly, if you have older plumbing, or if you just want to take a proactive step against flooding, then a sump pump installation is right for you. Sump pumps help prevent flood damage in your home by detecting increasing water pressure or water levels. If high levels are detected, the sump pump will pump water out of your basement and away from your home to a better location like a storm drain or a well.

The time it takes to repair a burst pipe can vary based on the location and severity of the break. A simple repair might take a few hours, while more complex situations could require several days. Water damage restoration, depending on the extent of the damage, can take anywhere from a few days to several weeks. It’s crucial to address water damage promptly to prevent mold growth and further structural issues.

Remember, in the event of a burst pipe, it’s essential to act quickly to minimize damage and ensure the safety of everyone in the home.

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

The strongest drain cleaner is an acidic drain cleaner. When you have a clogged drain, it’s always best to try snaking or plunging it first. This method will ensure you do not damage your pipes. If that fails, give a drain cleaning product a try (at your own risk). 

Different types of drain cleaners have different uses. When you have a tough clog – hair, food, grease, soap scum, paper – an acidic drain cleaning product will be your best bet.

Keep in mind that you should never use chemical drain cleaning products in a completely clogged drain. These types of clogs require the product to sit in the drain for an extended period and this can cause damage to your pipes.
If a drain cleaning product doesn’t cut it, plumbing contractors in Edmonton can help. Contact a local, experienced plumber to have your drains unclogged and working like new in no time.

Installing a water softener doesn’t take too long when a professional technician is completing the installation. As long as no unforeseen setbacks or problems are encountered, a professional plumber should be able to install a water softener in about two to three hours. Choosing to have your water softener installed by an expert is a good idea, as this will ensure that it is installed and working properly, helping to prevent problems down the road. In addition, water softeners are available in various makes and models and an experienced technician can help you find the best system for your home and your family.

Not all plumbing issues require immediate attention. However, there are several common problems that should be addressed as quickly as possible. Issues that count as a plumbing emergency including burst pipes, frozen pipes, clogged toilets, leaky faucets, and no hot water. Although some of these issues can be addressed quickly by the homeowner, others may require the immediate attention of a qualified professional plumber. If you believe you have a plumbing emergency, there are several emergency plumbers in Edmonton that you can contact. When seeking emergency plumbing services, be sure to ask the plumber if you will be paying a premium price for their emergency services. Professional plumbing companies, like ProSolutions Plumbing, Heating & Air Conditioning, will provide upfront pricing and will not charge premium emergency prices.