Devon's Local
Furnace Tune-Up
Company

Boiler heat is not expensive on a day-to-day basis. In fact, you may save in energy costs when heating your house with a boiler compared to a furnace.

However, installing a boiler is typically more complex and therefore more expensive than installing a furnace. On average, a boiler will cost anywhere from $2,500 to $10,000 to purchase and install (depending on the brand and the system’s energy efficiency rating). Plus, your home will need extensive modifications to make a boiler system work – radiant heating must be implemented.

On the other hand, the average cost to buy and install a furnace in Edmonton is only $5,500 to $10,000+. With boiler heat, you will save in the long run but will have to pay more upfront.

Boilers can last a really long time. In fact, the average lifespan of a boiler is 10 to 15 years. In order to extend the life of your boiler, it’s important to ensure that it is properly maintained and serviced on a regular basis. Even the best boiler will require maintenance and repairs from time to time.

If your boiler is giving you signs that it needs attention, make sure to call the Pros at ProSolutions for regular maintenance and fast repairs. This will ensure your boiler lasts as long as possible. Some signs to keep an eye out for include: low water pressure, no heat coming from your radiators, banging noises, a pilot light that keeps going out or isn’t blue.

There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.

1. Align the new furnace with existing gas lines and ductwork
2. Connect and seal to the ducting system
3. Connect intake and exhaust pipes
4. Connect the gas line
5. Connect the furnace to the electrical supply and thermostat
6. Connect the furnace to a drain hole

At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks. 

Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.

Hiring a professional will be more costly initially but will save you money in the long run.

Here’s how long it takes to install a new furnace.

To keep your boiler running efficiently, safely, and reliably, it should be professionally serviced once a year. This annual maintenance helps catch small issues before they become big (and expensive) problems, improves energy efficiency, and keeps your warranty valid.

But remembering to book your tune-up each year? That’s just one more thing on an already packed to-do list.

That’s where the ProBoiler Membership comes in. It includes your annual boiler tune-up, priority scheduling, and exclusive discounts on repairs—all without you having to remember a thing. We track the timing, reach out when it’s due, and make it simple to stay on top of your home comfort.

If you live in Edmonton or other northern areas your furnace should be professionally serviced once per year. This will prevent you from having to get expensive furnace repairs or replacements and will extend the life of your furnace. In fact, regularly scheduled inspections and service on your heating system can help identify potential breakdowns and reduce emergency repairs by as much as 95%! Regular service can also lower utility bills by up to 30%.

Harsh winters in Edmonton, and other Albertan cities, can take a toll on heating systems. A company that provides furnace service and maintenance will ensure that everything is in top working condition so that you can rely on your furnace all through the winter without having to worry about issues or failures.

Here’s how much furnace tune-ups & servicing costs in Edmonton.

The cost of servicing your furnace can cost between $150 – $500 per visit, depending on what is being done and the type of furnace you have in your home.

On average, heating and plumbing companies charge a rate of $150 – $300 per hour. However, if you have a membership to a Service Partner Plan, or another annual plan, you can reduce your cost. 

By signing up for a plan with a local furnace company in Edmonton like ProSolutions Plumbing Heating & Air Conditioning, and scheduling regular servicing, you can save money on the services provided and in energy costs. 

As well as the cost savings, regular servicing will help to prevent your system from encountering any unexpected problems – especially important during the long winter months.

Check our Furnace Offers & Coupons section for deals on Furnace Tune-ups & Servicing. We always offer competitive pricing too.

Heat pumps do not work in Alberta alone.

While heat pumps are designed to heat efficiently and cool homes by drawing heat from the outside air during cold months and expelling hot air from inside during warmer months, their effectiveness varies based on the climate.

In milder climates, heat pumps can be an excellent alternative to traditional furnaces and air conditioners. Some homeowners even prefer them for their dual functionality. However, in colder regions like Alberta, especially places like Edmonton, the efficiency of heat pumps diminishes.

The reason? As temperatures drop, heat pumps struggle to extract enough warmth from the frigid air to heat a home adequately. In contrast, traditional furnaces are specifically designed to provide consistent and reliable heat, even in the harshest of winters. For Alberta homeowners, where winters can be particularly brutal, relying solely on a heat pump can be a gamble.

Therefore, while heat pumps might be a viable option in some parts of the world, in Alberta, a traditional furnace remains the trusted and recommended choice for ensuring warmth and comfort throughout the year. There are also other and more reliable heating and cooling solutions available to Alberta homeowners.

The average cost to install a furnace in Edmonton is between $5,500 and $10,000+. The cost depends on various factors, including brand, size, company, etc. However, with the average cost of a new furnace being around $3,000 – $6,000, you can expect to pay anywhere from $5,000 to $10,000 in total, including installation. 

Check out our Current Offers to see how you can save with deals and rebates. 

In Alberta, a heat-loss calculation must be done when installing a new furnace. When hiring a professional to do your install, this will be factored into the price.

Hiring a professional heating company to install your furnace is essential. It may cost more initially but will save you money, time, and headache in the long run.