Water softeners last about 10 to 20 years. The lifetime of your water softener will depend on several factors including the type of water softener and brand you buy, as well as the installation. Proper installation is important to ensure maximum effectiveness and lifetime. One of the many benefits of having a water softener installed in your home is that it will extend the lifetime of your other plumbing appliances. Hard water is tough on appliances like water heaters and laundry machines, as the minerals in the water wear away pipe sealants over time causing leaks and clogs. However, a water softener will remove excessive mineral content from all of the water, helping to protect your plumbing and appliances from unnecessary damage.
There are several common signs that your hot water tank may stop working. Consider calling a water heater services company to take a look at and repair or replace your unit if:
There are several reasons a faucet may drip or leak. Most commonly, a defective part will cause a faucet to drip. However, more serious problems can also be indicated by a dripping faucet. For example, if your plumbing is not properly maintained and regularly cleaned, corrosion can result, leading to leaky pipes and a leaking faucet. In addition, extreme changes in temperature, a shifting foundation, high water pressure, and intrusive tree roots can also cause pipes to leak. In order to fix a dripping faucet, you’ll first need to find the location of the leak. In some cases, the leak may be difficult to find. If the cause of your dripping faucet is not obvious, having a qualified plumber detect and repair the leak is vital, as it could result in costly damage to your home if left unrepaired. If you notice a leak, make sure to contact an emergency plumber in Edmonton as soon as possible to avoid further damage.
The best homemade drain cleaner is baking soda. Baking soda can be used along with vinegar or lemon juice to create a strong and effective homemade drain cleaner that is safe for your home’s pipes.
To unclog your drains using baking soda and vinegar or lemon juice, pour one cup of baking soda then one cup of white vinegar or lemon juice down the drain. Allow this to sit for an hour then pour down a few cups of boiling water. If this doesn’t work the first time, repeat as necessary.
If your homemade drain cleaner isn’t working, call an experienced provider of drain cleaning plumbers near you to take a look. A professional plumber will be able to determine what is causing the clogged drain and how to fix it.
First, shut off the main water supply to prevent further damage. If the burst pipe is near any electrical outlets or appliances, turn off the electricity at the breaker box. Avoid standing in water to prevent electrical shock. Once you’ve secured the area, call a professional plumbing company to assess and repair the damage.
The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.
You can’t run out of hot water with tankless water heaters – unless, of course, the power supply is off or goes out. However, a tankless water heater can have trouble keeping up with demand if too many things require hot water all at once. For example, if several appliances are operating at the same time (the dishwasher, the laundry machine, etc.), and you go to have a hot shower, you may find that your tankless unit isn’t capable of providing enough hot water. Therefore, it’s important to ensure that you install a tankless water heater that has a large enough capacity to handle your demand for hot water.
Drain cleaners can be bad for pipes. This is particularly true for chemically costic drain cleaners.
Chemical drain cleaners create a chemical reaction in your pipes. This results in heat being emitted. It is this heat that can be bad for your pipes. Older and plastic pipes, especially, can be damaged by chemical drain cleaners. If you have plastic pipes and you use a chemical cleaner, the heat may melt the plastic. This can result in leaks and further damage. As well, drain cleaners are not good for septic systems.
To avoid damaging your pipes, try another method of unclogging your pipe first. If you’re unsure, call a professional drain cleaning plumber services provider to help you get the job done right.
The strongest drain cleaner is an acidic drain cleaner. When you have a clogged drain, it’s always best to try snaking or plunging it first. This method will ensure you do not damage your pipes. If that fails, give a drain cleaning product a try (at your own risk).
Different types of drain cleaners have different uses. When you have a tough clog – hair, food, grease, soap scum, paper – an acidic drain cleaning product will be your best bet.
Keep in mind that you should never use chemical drain cleaning products in a completely clogged drain. These types of clogs require the product to sit in the drain for an extended period and this can cause damage to your pipes.
If a drain cleaning product doesn’t cut it, plumbing contractors in Edmonton can help. Contact a local, experienced plumber to have your drains unclogged and working like new in no time.
ProSolutions Inc. stands out due to our commitment to fast and reliable service, especially in emergencies like burst pipes. With over 30 years of experience in Edmonton, our trained residential plumbers are equipped with advanced tools and technology to handle burst pipe repairs efficiently. Plus, our upfront pricing ensures no hidden costs, and our no overtime fee policy guarantees affordability even in emergencies.
In colder climates, water inside the pipes can freeze. When water freezes, it expands, which can cause the pipe to crack or burst. This is especially common if the pipes are not properly insulated or if there are sudden drops in temperature.
There are several preventive measures you can take:
