Ft. Saskatchewan's Local
Heater Repair
Company

For a simple boiler replacement, you can expect a trained professional to take between 4 and 6 hours.

Your new boiler will be up and running in less than a day. However, installing a brand new boiler, where one didn’t exist before, is a bigger job. Upgrading your current boiler to a different system or moving your boiler to a new location can also be more involved and will take a bit longer.

Because these jobs are more complex, they may take a team of professionals a few days to complete. Typically, you can expect to wait no more than a week for your new system to be up and ready!

You should consider replacing your furnace if it’s over 15-20 years old, requires frequent and costly repairs, produces uneven heating, or if your energy bills have been steadily increasing.

It’s also a good idea to upgrade to a more efficient model to save on long-term energy costs.

The most energy-efficient furnace is one that is ENERGY STAR certified and has an efficiency rating of 97% or higher. When you see an ENERGY STAR symbol on your appliance, you can be certain that it has been certified as energy efficient. 

When it comes to the type of furnace, gas furnaces are typically the most energy-efficient. Although preferred in some situations, electric and oil furnaces are less efficient. Therefore, gas-powered furnaces are recommended.

The heating professionals at ProSolutions PHAC recommend the following high-efficiency furnaces:

• TRANE S9V2-VS Gas Furnace
• AirEase A97MV High-Efficiency Modulating Gas Furnace
• Goodman GMVM97 Modulating, Variable-Speed Gas Furnace

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

Yes—you definitely should! Even though your furnace isn’t heating your home during the summer, your HVAC system still uses the same ductwork and blower when you run your central air conditioner. That means your furnace filter is still working hard to trap dust, pollen, pet hair, and smoke particles—especially during Edmonton’s dry, dusty summers or wildfire season.

In fact, summer can be one of the most important times to stay on top of filter changes if:

• You use central AC

• You have allergies

• You experience poor outdoor air quality (like wildfire smoke)

• You have pets that shed

Not sure when to change it? Our Air Filter Delivery Add-On (available with ProComfort or ProHeating Memberships) makes it easy. We deliver the right filter size on your preferred schedule—so your home stays cool and your air stays clean, no matter the season.

Shopping for a new furnace and wondering what are BTUs? BTU stands for British Thermal Unit – a value traditionally assigned to heat. Technically, a single BTU is the amount of energy that is necessary to increase the temperature of one pound of water by one degree Fahrenheit at sea level. As far as a heating system goes, BTUs refer to the amount of heat that a furnace is able to output.

When it comes to furnaces, the larger the square footage that needs to be heated, the more BTUs you’ll require. For example, it’s suggested that a 1,500 square foot home has a furnace that is able to output 45,000 to 90,000 BTUs.

A professional technician will have an extensive checklist to go through when providing furnace tune-up service and maintenance. The items on this list cover every part of your furnace in order to ensure that it is in top working condition.

Some of the most important items included in this furnace service checklist are:

• Vent, blower, and ductwork cleaning
• Inspection of the flue for damage and dents
• Examination of all belts and their tension
• Adjustment of the furnace’s pilot light flame
• Calibration of the thermostat
• Visual inspection of all electrical wiring
• Inspection of the furnace filter
• Cleaning and removing any debris

A checklist that includes no less than 22 points of inspection should be used during your furnace service.

A residential boiler system is used to heat a household. The boiler heats water inside a tank and distributes this hot water (or, in some cases, steam) via pipes, radiators and/or a radiant in-floor system in order to heat the inside of a home. Once the water has cooled and can no longer provide heat, it is sent back to the boiler to be reheated.

Although the name might suggest otherwise, modern-day boilers do not boil water. The term boiler comes from the fact that, in the past, steam boilers were common. Steam boilers boil water in order to create steam for heating purposes. Today, however, most boilers are water heating systems that distribute hot water, rather than steam, in order to heat a house.