Beaumont's Local
Boiler Repair
Company

Yes, there are energy-efficient and eco-friendly furnace options available. Look for ENERGY STAR-certified furnaces that meet strict efficiency and environmental standards. High-efficiency furnaces, often with AFUE (Annual Fuel Utilization Efficiency) ratings of 90% or higher, are also environmentally friendly. They consume less fuel and produce fewer emissions, contributing to reduced carbon footprint and lower energy bills.

Heat pumps, which use electricity to transfer heat rather than burning fuel, are another eco-friendly option. Additionally, consider furnaces with features like variable-speed blowers, which improve efficiency and comfort. Your HVAC professional can help you choose the best option based on your environmental concerns and budget.

The size of the furnace you’ll need largely depends on the size of your home. Size recommendations based on square footage are:

1,200 square foot home: 36,000 to 72,000 BTUs
1,500 square foot home: 45,000 to 90,000 BTUs
1,800 square foot home: 54,000 to 108,000 BTUs
2,100 square foot home: 63,000 to 126,000 BTUs
2,400 square foot home: 72,000 to 144,000 BTUs

Other factors that affect the size of the new furnace installation you’ll need include:

• Climate zone (for example, Edmonton is in Climate Zone 5)
• Quality of insulation
• Window thickness
• Ceiling height
• Number of people living in your home
• Preferred temperature
• Size and state of the basement

For more info om furnace shopping, read our full article on “how to choose the right furnace“.

A gas furnace is the most efficient way to heat your home and by far the most popular in Alberta. Gas furnaces are reliable, cost-effective, and efficient and manufacturers are continually improving their efficiency and quietness and introducing new features.

Amana is one of the best brands of furnaces, especially for homes in Alberta. Amana is one of the few furnace brands with a stainless steel heat exchanger and the only with a lifetime replacement warranty. This makes an Amana furnace a reliable option for any household.

We also think that Trane Furnaces are an exceptional option in Alberta. They have been very reliable over the past few years and look to continue that manufacturing trend.

If you’re wondering what is the best brand of furnace for your home, talk to a local heating services provider. Their expertise can help you make the best choice for your climate.

There are several heating systems to choose from, including:

• Gas Furnaces: These are efficient and widely used for their affordability and heating capabilities.
• Electric Furnaces: These are suitable for areas with milder winters but tend to be less energy-efficient.
• Heat Pumps: They can both heat and cool your home, providing year-round comfort.
• Hybrid Systems: Combining a heat pump and a gas furnace for maximum efficiency in different weather conditions.
• Ductless Mini-Splits: Ideal for heating individual rooms or spaces without a central duct system.

A professional technician will have an extensive checklist to go through when providing furnace tune-up service and maintenance. The items on this list cover every part of your furnace in order to ensure that it is in top working condition.

Some of the most important items included in this furnace service checklist are:

• Vent, blower, and ductwork cleaning
• Inspection of the flue for damage and dents
• Examination of all belts and their tension
• Adjustment of the furnace’s pilot light flame
• Calibration of the thermostat
• Visual inspection of all electrical wiring
• Inspection of the furnace filter
• Cleaning and removing any debris

A checklist that includes no less than 22 points of inspection should be used during your furnace service.

A furnace could stop working for a variety of reasons. Most commonly, furnaces stop working because of:

• Blocked or clogged vents, blowers, and/or ductwork
• A dirty, clogged filter
• Thermostat malfunctions (or just a low battery)
• Problem with your power supply
• Damage to the flue
• Issues with belts
• Problems with the pilot light
• Wiring issues

Winters in Edmonton, Alberta can be cold! Avoid layers upon layers of sweaters – if you’re experiencing any of the following issues, get your furnace repaired right away: 

• Strange smells, like burning or chemicals 
• You can’t turn the furnace on
• Inadequate and inconsistent heat. For example, some rooms are hotter than others and some rooms have no heat at all.
• Loud, banging or rattling noises

If you are in Edmonton and surrounding area, contact ProSolutions Inc, we’d love to be your HVAC company of choice!

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.

1. Align the new furnace with existing gas lines and ductwork
2. Connect and seal to the ducting system
3. Connect intake and exhaust pipes
4. Connect the gas line
5. Connect the furnace to the electrical supply and thermostat
6. Connect the furnace to a drain hole

At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks. 

Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.

Hiring a professional will be more costly initially but will save you money in the long run.

Here’s how long it takes to install a new furnace.