Beaumont's #1 Furnace Repair Experts – Fast, Reliable 24/7 Service Guaranteed

Shopping for a new furnace and wondering what are BTUs? BTU stands for British Thermal Unit – a value traditionally assigned to heat. Technically, a single BTU is the amount of energy that is necessary to increase the temperature of one pound of water by one degree Fahrenheit at sea level. As far as a heating system goes, BTUs refer to the amount of heat that a furnace is able to output.

When it comes to furnaces, the larger the square footage that needs to be heated, the more BTUs you’ll require. For example, it’s suggested that a 1,500 square foot home has a furnace that is able to output 45,000 to 90,000 BTUs.

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

Yes, there are energy-efficient and eco-friendly furnace options available. Look for ENERGY STAR-certified furnaces that meet strict efficiency and environmental standards. High-efficiency furnaces, often with AFUE (Annual Fuel Utilization Efficiency) ratings of 90% or higher, are also environmentally friendly. They consume less fuel and produce fewer emissions, contributing to reduced carbon footprint and lower energy bills.

Heat pumps, which use electricity to transfer heat rather than burning fuel, are another eco-friendly option. Additionally, consider furnaces with features like variable-speed blowers, which improve efficiency and comfort. Your HVAC professional can help you choose the best option based on your environmental concerns and budget.

In the Edmonton area, you should typically change your furnace filter every 1 to 3 months—but it depends on your home and lifestyle:

• Every 1 month if you have multiple pets, allergies, or live in a dusty area

• Every 2 months for average homes with one pet or light allergies

• Every 3 months in smaller homes with no pets and minimal dust

• More often during heavy-use seasons, like winter (heating) and summer (if you use central AC)

Filter size and quality also play a role—smaller or lower-MERV filters usually need changing more frequently.

If you’re tired of remembering when to replace them, our ProComfort Dual and ProHeating Memberships offer an Air Filter Delivery Add-On. We’ll deliver the right filters to your door on schedule—so your home stays clean, your air stays fresh, and your HVAC system runs at its best without any guesswork.

The size of the furnace you’ll need largely depends on the size of your home. Size recommendations based on square footage are:

1,200 square foot home: 36,000 to 72,000 BTUs
1,500 square foot home: 45,000 to 90,000 BTUs
1,800 square foot home: 54,000 to 108,000 BTUs
2,100 square foot home: 63,000 to 126,000 BTUs
2,400 square foot home: 72,000 to 144,000 BTUs

Other factors that affect the size of the new furnace installation you’ll need include:

• Climate zone (for example, Edmonton is in Climate Zone 5)
• Quality of insulation
• Window thickness
• Ceiling height
• Number of people living in your home
• Preferred temperature
• Size and state of the basement

For more info om furnace shopping, read our full article on “how to choose the right furnace“.

It shouldn’t take a professional heating company in Edmonton too long to install a new boiler. For a simple boiler replacement, you can expect a trained professional to take between 4 and 6 hours.

Your new boiler will be up and running in less than a day. However, installing a brand new boiler, where one didn’t exist before, is a bigger job. Upgrading your current boiler to a different system or moving your boiler to a new location can also be more involved and will take a bit longer.

Because these jobs are more complex, they may take a team of professionals a few days to complete. Typically, you can expect to wait no more than a week for your new system to be up and ready!

You should consider replacing your furnace if it’s over 15-20 years old, requires frequent and costly repairs, produces uneven heating, or if your energy bills have been steadily increasing.

It’s also a good idea to upgrade to a more efficient model to save on long-term energy costs.

It typically takes between four and eight hours to install a new furnace in Edmonton or the surrounding areas. However, install time can vary depending on factors like the age of your home and the condition of its wiring and ductwork. 

No need to worry about spending a long night freezing inside your home during an Albertan winter. A professional furnace company can have your new furnace up and running within a day to keep you and your family comfortable and warm!

When getting free furnace installation quotes in Edmonton area, make sure to ask how long the installation is expected to take. Local furnace companies will have a good idea based on their experience in your area.