SEER (Seasonal Energy Efficiency Ratio) measures how efficiently an air conditioner operates over a typical cooling season. It’s calculated by dividing the total cooling output (in BTUs) by the total electrical energy input (in watt-hours). A higher SEER rating indicates greater efficiency, leading to lower utility bills.
SEER2 is the updated version of this rating system. It uses more rigorous testing procedures that better reflect real-world conditions, like how your AC actually performs with ductwork and airflow resistance in a typical Edmonton home. Because of this, SEER2 ratings are slightly lower than SEER, even though the equipment performance hasn’t changed. For example, a unit with a 15.2 SEER2 rating is roughly equivalent to a 16 SEER under the old scale.
In Alberta, where summers can get hot and dry, a SEER2 rating of 14.3 or higher is generally recommended for energy efficiency and comfort. Some systems go as high as 18+ SEER2. While higher-rated systems cost more upfront, they offer better long-term savings.
To find the best AC system for your home you should take into account the size of your home, how many levels, what ductwork is available, and how many windows you have. All of these can factor into the efficiency of your air conditioner and the cooling requirements.
By booking a free home estimate, our team at ProSolutions can help recommend the best unit for your cooling needs! Just as we’ve done for more than 10,000 homes in the Edmonton area for over 25 years.
Experts like ProSolutions will tell you that it’s best to have at least two-thirds of your vents left open for best operation of your AC system. It is far harder to cool down a house versus keeping it at a constant temperature.
All AC Unit warranty installations are backed by a minimum 5 year comprehensive parts warranty & most higher efficient models boast 10 years out of the box. Ask us about extended labour warranty on qualifying AC units!
The most energy-efficient furnace is one that is ENERGY STAR certified and has an efficiency rating of 97% or higher. When you see an ENERGY STAR symbol on your appliance, you can be certain that it has been certified as energy efficient.
When it comes to the type of furnace, gas furnaces are typically the most energy-efficient. Although preferred in some situations, electric and oil furnaces are less efficient. Therefore, gas-powered furnaces are recommended.
The heating professionals at ProSolutions PHAC recommend the following high-efficiency furnaces:
In Edmonton, both boilers and furnaces are used to provide homes with heat. The difference between a boiler and a furnace is the way in which they heat a home.
A boiler takes water and heats it then circulates this hot water (or steam, in some cases) throughout the house in order to heat it. The hot water is circulated using pipes, radiators and/or radiant floor systems. Once the water has cooled, it is returned to the boiler to be heated and reused in a closed-loop system.
A furnace, on the other hand, heats and distributes air in order to heat a home. This hot air is distributed via ductwork and vents.
There are several possible reasons. The usual ones relate to a frozen evaporator coil, dirty filter, dirty condenser coils, a leak somewhere in the refrigeration system or possibly in the ductwork system. It could also be that your unit is older and simply not able to keep up with the extra heavy cooling demands with our weather changes these days. ProSolutions Inc. can check this for you, identify the issue, and advise you on the best actions to take.
Typically, a mini split AC does not use a lot of electricity. Ductless air conditioners can use anywhere from 0.30 to 4+ kWh (kiloWatt-hours) of power per hour. That said, the amount of electricity your ductless mini split air conditioner will use depends on several factors, including:
If you find leaking water under the furnace, the drain line may be clogged with dirt, dust, and fungus growth.
You can try unplugging it with a wet-dry vac, but it’s better to let the experts at ProSolutions Inc. handle it. They can help you with AC repairs, including fixing leakages.
Reasons your AC unit won’t run at all, sounds like an electrical problem. A fuse may have blown or circuit breaker tripped. If resetting those doesn’t solve the problem there may be an issue with the unit’s circuit board. In which case check with ProSolutions Inc. to give you a diagnosis.
Trust ProSolutions Inc.’s expertise and choose Ameristar Air Conditioning brand for a comfortable summer.
ProSolutions has a complete range of systems and accessories ready to install in Edmonton from $3400 to $10,000+ for ultra high efficient and ultra quiet inverter units.
These AC systems are built for our weather and come with warranties to match. 10 years parts and warranty available and some brands even carry a manufacturers 10 year or lifetime unit replacement guarantee.
It is not cheaper to install AC in Edmonton in the winter, contrary to popular belief. While some ACs may be sold in the Winter, they cannot be fully installed and activated until the temperature reaches above +10° ! That means, a second visit is often needed once the weather clears up. Instead, consider saving your AC purchase until the Spring. Many companies, ProSolutions included, is gearing up for the Summer and looking forward to the early birds.
If you require air conditioner and furnace installation, having both replaced at the same time may also help you save money.
Check out our air conditioner installation, repair and maintenance deals here – Cooling System Coupons.
