Leduc's Local
Garage Heater Install
Company

A furnace could stop working for a variety of reasons. Most commonly, furnaces stop working because of:

• Blocked or clogged vents, blowers, and/or ductwork
• A dirty, clogged filter
• Thermostat malfunctions (or just a low battery)
• Problem with your power supply
• Damage to the flue
• Issues with belts
• Problems with the pilot light
• Wiring issues

Winters in Edmonton, Alberta can be cold! Avoid layers upon layers of sweaters – if you’re experiencing any of the following issues, get your furnace repaired right away: 

• Strange smells, like burning or chemicals 
• You can’t turn the furnace on
• Inadequate and inconsistent heat. For example, some rooms are hotter than others and some rooms have no heat at all.
• Loud, banging or rattling noises

If you are in Edmonton and surrounding area, contact ProSolutions Inc, we’d love to be your HVAC company of choice!

The average cost to install a furnace in Edmonton is between $5,500 and $10,000+. The cost depends on various factors, including brand, size, company, etc. However, with the average cost of a new furnace being around $3,000 – $6,000, you can expect to pay anywhere from $5,000 to $10,000 in total, including installation. 

Check out our Current Offers to see how you can save with deals and rebates. 

In Alberta, a heat-loss calculation must be done when installing a new furnace. When hiring a professional to do your install, this will be factored into the price.

Hiring a professional heating company to install your furnace is essential. It may cost more initially but will save you money, time, and headache in the long run.

The cost of furnace replacement varies depending on factors like the type of furnace, its size, labour costs, and any additional accessories or modifications needed for installation.
On average, you can expect to invest between $5,500 to $10,000+ for a new furnace, including installation. High-efficiency models or complex installations may push the cost higher.

The size of the furnace you’ll need largely depends on the size of your home. Size recommendations based on square footage are:

1,200 square foot home: 36,000 to 72,000 BTUs
1,500 square foot home: 45,000 to 90,000 BTUs
1,800 square foot home: 54,000 to 108,000 BTUs
2,100 square foot home: 63,000 to 126,000 BTUs
2,400 square foot home: 72,000 to 144,000 BTUs

Other factors that affect the size of the new furnace installation you’ll need include:

• Climate zone (for example, Edmonton is in Climate Zone 5)
• Quality of insulation
• Window thickness
• Ceiling height
• Number of people living in your home
• Preferred temperature
• Size and state of the basement

For more info om furnace shopping, read our full article on “how to choose the right furnace“.

Heat pumps do not work in Alberta alone.

While heat pumps are designed to heat efficiently and cool homes by drawing heat from the outside air during cold months and expelling hot air from inside during warmer months, their effectiveness varies based on the climate.

In milder climates, heat pumps can be an excellent alternative to traditional furnaces and air conditioners. Some homeowners even prefer them for their dual functionality. However, in colder regions like Alberta, especially places like Edmonton, the efficiency of heat pumps diminishes.

The reason? As temperatures drop, heat pumps struggle to extract enough warmth from the frigid air to heat a home adequately. In contrast, traditional furnaces are specifically designed to provide consistent and reliable heat, even in the harshest of winters. For Alberta homeowners, where winters can be particularly brutal, relying solely on a heat pump can be a gamble.

Therefore, while heat pumps might be a viable option in some parts of the world, in Alberta, a traditional furnace remains the trusted and recommended choice for ensuring warmth and comfort throughout the year. There are also other and more reliable heating and cooling solutions available to Alberta homeowners.

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

Furnace filter replacement is important if you’re using your AC. Maybe not as frequently as in winter when monthly changes are best. But check the filter regularly to see that it is functioning properly, and replace when necessary.

If you run your AC during the spring or fall, you will want to check your filter more often since this time of year has more allergens and particulates in the air that can cause you to become sick.

There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.

1. Align the new furnace with existing gas lines and ductwork
2. Connect and seal to the ducting system
3. Connect intake and exhaust pipes
4. Connect the gas line
5. Connect the furnace to the electrical supply and thermostat
6. Connect the furnace to a drain hole

At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks. 

Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.

Hiring a professional will be more costly initially but will save you money in the long run.

Here’s how long it takes to install a new furnace.