St. Albert's Trusted
AC Financing company

Experts like ProSolutions will tell you that it’s best to have at least two-thirds of your vents left open for best operation of your AC system. It is far harder to cool down a house versus keeping it at a constant temperature. 

Does the size of AC unit effect performance? Yes! 

If the unit is too large, the space gets too cool and humidity is not removed. You’ll feel cold and clammy. Plus the frequent cycling can wear out your AC Unit faster since the hardest load on your AC is when you start it up. You can also freeze up the AC unit if the air flow is too low and the unit can not be kept from freezing up. Freezing up of a central AC system is a recipe for disaster on the HVAC equipment.

Book your home estimate today, and our Pros can recommend the best size AC for your home and needs. 

There are several possible reasons. The usual ones relate to a frozen evaporator coil, dirty filter, dirty condenser coils, a leak somewhere in the refrigeration system or possibly in the ductwork system. It could also be that your unit is older and simply not able to keep up with the extra heavy cooling demands with our weather changes these days. ProSolutions Inc. can check this for you, identify the issue, and advise you on the best actions to take.

Replacing an old air conditioner involves more than just swapping out the unit. Several parts of your home’s cooling system may need to be inspected, repaired, or upgraded to ensure your new AC runs efficiently and reliably. This can include:

• Ductwork: Is it properly sized, sealed, and in good condition?

• Insulation & Windows: Poor insulation or drafty windows can affect performance.

• Refrigerant Lines: Existing piping may need to be replaced or flushed, depending on the type of refrigerant.

• Condensate Drainage: Proper drainage is crucial to avoid water damage.

• Electrical Wiring: The wiring and breaker may need updating to meet current safety codes.

• Grilles & Registers: These may need to be cleaned, repaired, or resized.

• Filters & Coils: The furnace filter and evaporator coil should be inspected for cleanliness and wear.

Every home is different. That’s why a professional assessment from ProSolutions is the best way to determine exactly what’s needed for a proper air conditioning replacement in Edmonton’s climate.

In Edmonton, both boilers and furnaces are used to provide homes with heat. The difference between a boiler and a furnace is the way in which they heat a home.

A boiler takes water and heats it then circulates this hot water (or steam, in some cases) throughout the house in order to heat it. The hot water is circulated using pipes, radiators and/or radiant floor systems. Once the water has cooled, it is returned to the boiler to be heated and reused in a closed-loop system.

A furnace, on the other hand, heats and distributes air in order to heat a home. This hot air is distributed via ductwork and vents.

You do not need a ductless unit in every room of your home. However, a single wall-mounted ductless unit can only cool one room or unobstructed zone (with good airflow). Thus, most Edmonton homeowners opt to install a wall-mounted mini split AC unit in each main living space they want to keep cool.

Keep in mind that one outdoor ductless condenser unit can support multiple (up to four) indoor units. Thus, one outdoor unit and four indoor units would cool four rooms.

Not sure how many ductless mini split air conditioner units you need or where they should be located? The ductless air conditioner installation experts at ProSolutions Inc. can help. Our professional HVAC technicians will help you decide how many indoor units you need, where to install them, and what size and model of mini split AC will work best for your Edmonton home.

The cost to install an AC in Edmonton will depend on the unit you choose to purchase, as well as the unit you are replacing and the condition of your home and ductwork. The cost to purchase a unit and have it installed by a professional air conditioning services provider can be anywhere from $5,000 to $10,000 or more.

Simple, low-end air conditioning units will cost less to install. If you would like a high-efficiency AC that is ultra-quiet, you can expect to pay more. It’s important to note, however, that energy-efficient models can help you save on utility bills.

It may look cheaper to purchase an AC on it’s own, however finding a handyman to install and maintain means higher costs and stress in the long run. Many companies do not install AC units not supplied by them (some manufacturer’s even require it!)

ProSolutions offers free home estimates, professional recommendations, expert installations, and dedicated yearly maintenance with our ProCooling memberships. All in one! 

Although mini split ACs have numerous advantages, there are also several disadvantages of ductless air conditioners that homeowners must consider.

The main disadvantages of ductless air conditioning include:

• Initial cost – the cost to install a ductless mini split air conditioner is similar to that of a forced air system and much more expensive than a portable AC.
• Aesthetics – with a ductless air conditioner, the indoor evaporator unit is mounted to a wall or ceiling. Some homeowners do not like this aesthetic and prefer a more inconspicuous central air conditioning system.
• Regular maintenance – like a forced air system, a mini split AC requires routine maintenance. For example, the filter of each interior evaporator unit should be cleaned every 4 to 6 weeks (or more frequently if you smoke or have pets).
• Risk of leaking – Due to the indoor condenser being mounted on the wall inside your home, there is always a possibility of leaks. Regular maintenance should help prevent this, but there have been instances where tenants or homeowners neglected proper maintenance, resulting in leaks that damaged walls, decor, and other belongings.