St. Albert's Local
Garage Heater Install
Company

Drain cleaners can be bad for pipes. This is particularly true for chemically costic drain cleaners. 

Chemical drain cleaners create a chemical reaction in your pipes. This results in heat being emitted. It is this heat that can be bad for your pipes. Older and plastic pipes, especially, can be damaged by chemical drain cleaners. If you have plastic pipes and you use a chemical cleaner, the heat may melt the plastic. This can result in leaks and further damage. As well, drain cleaners are not good for septic systems.

To avoid damaging your pipes, try another method of unclogging your pipe first. If you’re unsure, call a professional drain cleaning plumber services provider to help you get the job done right.

There are several reasons a faucet may drip or leak. Most commonly, a defective part will cause a faucet to drip. However, more serious problems can also be indicated by a dripping faucet. For example, if your plumbing is not properly maintained and regularly cleaned, corrosion can result, leading to leaky pipes and a leaking faucet. In addition, extreme changes in temperature, a shifting foundation, high water pressure, and intrusive tree roots can also cause pipes to leak. In order to fix a dripping faucet, you’ll first need to find the location of the leak. In some cases, the leak may be difficult to find. If the cause of your dripping faucet is not obvious, having a qualified plumber detect and repair the leak is vital, as it could result in costly damage to your home if left unrepaired. If you notice a leak, make sure to contact an emergency plumber in Edmonton as soon as possible to avoid further damage.

Water softeners last about 10 to 20 years. The lifetime of your water softener will depend on several factors including the type of water softener and brand you buy, as well as the installation. Proper installation is important to ensure maximum effectiveness and lifetime. One of the many benefits of having a water softener installed in your home is that it will extend the lifetime of your other plumbing appliances. Hard water is tough on appliances like water heaters and laundry machines, as the minerals in the water wear away pipe sealants over time causing leaks and clogs. However, a water softener will remove excessive mineral content from all of the water, helping to protect your plumbing and appliances from unnecessary damage.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

Chemical drain cleaners do work, depending on the type of clog you have and how tough it is. Chemical drain cleaners work by creating a chemical reaction in your pipes.

When using chemical drain cleaners, always make sure to choose the right type of cleaner for the job. Also, make sure you know what kind of pipes you have, and how old they are so you can avoid using any chemical drain cleaner that might damage your pipes. Older pipes can become damaged due to the chemical reaction created by chemical drain cleaners. This can lead to bigger issues, like leaking pipes, and the need for plumbing repair services.

To avoid damage, physical methods are always best. Plunging or snaking a drain will ensure that it is not damaged by chemicals. When in doubt, call a drain cleaning plumber for professional advice and assistance.

A sump pump is an appliance that is used to help prevent flooding in your home. If you’re in a flood zone and your basement floods regularly, if you have older plumbing, or if you just want to take a proactive step against flooding, then a sump pump installation is right for you. Sump pumps help prevent flood damage in your home by detecting increasing water pressure or water levels. If high levels are detected, the sump pump will pump water out of your basement and away from your home to a better location like a storm drain or a well.

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

Yes! With our ProWater Softener Membership, we don’t just deliver salt—we pick it up, bring it to your home, and fill your tank for you. Whether you prefer a small monthly fee or a discounted annual plan, we tailor your delivery schedule based on your softener’s usage and your household’s needs.

Plus, if your system ever needs service, our team is ready to help—whether it’s our technicians, shop crew, or installers, we’ll send the right person for the job based on your maintenance history and availability.