Beaumont's Trusted
AC Financing company

SEER (Seasonal Energy Efficiency Ratio) measures how efficiently an air conditioner operates over a typical cooling season. It’s calculated by dividing the total cooling output (in BTUs) by the total electrical energy input (in watt-hours). A higher SEER rating indicates greater efficiency, leading to lower utility bills.

SEER2 is the updated version of this rating system. It uses more rigorous testing procedures that better reflect real-world conditions, like how your AC actually performs with ductwork and airflow resistance in a typical Edmonton home. Because of this, SEER2 ratings are slightly lower than SEER, even though the equipment performance hasn’t changed. For example, a unit with a 15.2 SEER2 rating is roughly equivalent to a 16 SEER under the old scale.

In Alberta, where summers can get hot and dry, a SEER2 rating of 14.3 or higher is generally recommended for energy efficiency and comfort. Some systems go as high as 18+ SEER2. While higher-rated systems cost more upfront, they offer better long-term savings.

Typically, a mini split AC does not use a lot of electricity. Ductless air conditioners can use anywhere from 0.30 to 4+ kWh (kiloWatt-hours) of power per hour. That said, the amount of electricity your ductless mini split air conditioner will use depends on several factors, including:

• Outdoor temperature vs. desired indoor temperature – the greater the difference between the outdoor and desired indoor temperature, the more electricity your mini split AC will use. 
• BTU rating (i.e. the size of the unit) – generally, the higher the BTU, the more energy the unit will consume. 
• Unit efficiency – the higher the efficiency rating, the less electricity the ductless mini split air conditioner will use. 
• Zone size – the larger the area, the more electricity your system will need to cool it. 
• Insulation in your home – if your home has good insulation, your mini split AC will require less energy to reach and maintain your desired indoor temperature. 
• Usage – the more you use the system, the more energy it will consume.

We recommend a smart thermostat when your home comfort system has both an AC and Furnace unit. In addition to improved comfort settings, many smart thermostats are able to alert you of troubles like “Too Hot” or “Too Cold” warnings – some can even report directly to your phone!

If it’s battery-operated, check the batteries and replace them as necessary. Otherwise, if you have a problem, call one of our experts at ProSolutions.

ProSolutions Inc. suggests Ameristar Air Conditioning brand for a cost-effective and energy-efficient solution.

The size of AC you need will depend on several factors.

For help finding the right size AC for your home, book your free home estimate! We will help you find the right size and the right unit for your needs. Our technician will complete a load calculation to determine what size AC you need. Factors like the size of your home, the local climate, the number of appliances you have, etc. will be taken into account. 

Keep in mind, while you can have an AC unit that is too small you can also have a unit that is too big. An AC that is too small will not be able to cool your whole home and a unit that is too big will waste energy. In both scenarios, your utility bill will be more than necessary and you will likely be reducing the lifespan of the air conditioner! The size of AC you need is essential to your home comfort. ProSolutions can help you find the perfect air conditioner unit for your home and get it installed for the perfect Summer.

As long as a ductless air conditioner is properly installed and adequately maintained, it will last approximately 10 to 15 years or more. Thus, ductless mini split ACs have about the same lifespan as traditional forced air systems.

Here are a few ways to ensure your mini split AC system lasts as long as possible.

• Have a professional ductless air conditioner installation company install your mini split AC.
• Schedule routine ductless AC maintenance with a local HVAC company.
• Address ductless mini split air conditioner repairs promptly.
• Regularly clean the filters in your mini split AC units.

The AC unit suction line needs protection from outside air otherwise condensation will occur with water dripping on the floor or ground. It also means that refrigerant gas can warm up before it reaches the compressor. Make sure the line is covered with insulation to protect it and maximize the efficiency of your AC unit.

The cost to install an AC in Edmonton will depend on the unit you choose to purchase, as well as the unit you are replacing and the condition of your home and ductwork. The cost to purchase a unit and have it installed by a professional air conditioning services provider can be anywhere from $5,000 to $10,000 or more.

Simple, low-end air conditioning units will cost less to install. If you would like a high-efficiency AC that is ultra-quiet, you can expect to pay more. It’s important to note, however, that energy-efficient models can help you save on utility bills.

It may look cheaper to purchase an AC on it’s own, however finding a handyman to install and maintain means higher costs and stress in the long run. Many companies do not install AC units not supplied by them (some manufacturer’s even require it!)

ProSolutions offers free home estimates, professional recommendations, expert installations, and dedicated yearly maintenance with our ProCooling memberships. All in one! 

To find the best AC system for your home you should take into account the size of your home, how many levels, what ductwork is available, and how many windows you have. All of these can factor into the efficiency of your air conditioner and the cooling requirements. 

By booking a free home estimate, our team at ProSolutions can help recommend the best unit for your cooling needs! Just as we’ve done for more than 10,000 homes in the Edmonton area for over 25 years.