Beaumont's Local
Boiler Installation
Company

The size of the furnace you’ll need largely depends on the size of your home. Size recommendations based on square footage are:

1,200 square foot home: 36,000 to 72,000 BTUs
1,500 square foot home: 45,000 to 90,000 BTUs
1,800 square foot home: 54,000 to 108,000 BTUs
2,100 square foot home: 63,000 to 126,000 BTUs
2,400 square foot home: 72,000 to 144,000 BTUs

Other factors that affect the size of the new furnace installation you’ll need include:

• Climate zone (for example, Edmonton is in Climate Zone 5)
• Quality of insulation
• Window thickness
• Ceiling height
• Number of people living in your home
• Preferred temperature
• Size and state of the basement

For more info om furnace shopping, read our full article on “how to choose the right furnace“.

The cost of furnace replacement varies depending on factors like the type of furnace, its size, labour costs, and any additional accessories or modifications needed for installation.
On average, you can expect to invest between $5,500 to $10,000+ for a new furnace, including installation. High-efficiency models or complex installations may push the cost higher.

Furnace size is determined by your home’s square footage, insulation, climate, and other factors. It’s best to consult with a professional technician who can perform a load calculation to determine the right size for your specific needs.
Oversized or undersized furnaces can lead to inefficiencies and comfort issues.

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

If there is a crack in the heat exchanger of your heating system, your furnace could be leaking carbon monoxide (CO). This can be dangerous for you and your family, as CO can cause serious bodily harm and even result in death. Carbon monoxide is a colourless, tasteless, and odourless gas and therefore is not easily detected, especially in small quantities.

Your furnace may be leaking carbon monoxide if you or other members of your household are experiencing any of the following symptoms:

• Headache
• Weakness
• Dizziness
• Nausea or vomiting
• Feeling hungover
• Shortness of breath
• Confusion
• Blurred vision
• Loss of consciousness

If you think your furnace is leaking carbon monoxide contact a local heating company right away. If you think you are experiencing carbon monoxide poisoning, please seek professional medical advice immediately.

A residential boiler system is used to heat a household. The boiler heats water inside a tank and distributes this hot water (or, in some cases, steam) via pipes, radiators and/or a radiant in-floor system in order to heat the inside of a home. Once the water has cooled and can no longer provide heat, it is sent back to the boiler to be reheated.

Although the name might suggest otherwise, modern-day boilers do not boil water. The term boiler comes from the fact that, in the past, steam boilers were common. Steam boilers boil water in order to create steam for heating purposes. Today, however, most boilers are water heating systems that distribute hot water, rather than steam, in order to heat a house.

For a simple boiler replacement, you can expect a trained professional to take between 4 and 6 hours.

Your new boiler will be up and running in less than a day. However, installing a brand new boiler, where one didn’t exist before, is a bigger job. Upgrading your current boiler to a different system or moving your boiler to a new location can also be more involved and will take a bit longer.

Because these jobs are more complex, they may take a team of professionals a few days to complete. Typically, you can expect to wait no more than a week for your new system to be up and ready!

A gas furnace is the most efficient way to heat your home and by far the most popular in Alberta. Gas furnaces are reliable, cost-effective, and efficient and manufacturers are continually improving their efficiency and quietness and introducing new features.

Amana is one of the best brands of furnaces, especially for homes in Alberta. Amana is one of the few furnace brands with a stainless steel heat exchanger and the only with a lifetime replacement warranty. This makes an Amana furnace a reliable option for any household.

We also think that Trane Furnaces are an exceptional option in Alberta. They have been very reliable over the past few years and look to continue that manufacturing trend.

If you’re wondering what is the best brand of furnace for your home, talk to a local heating services provider. Their expertise can help you make the best choice for your climate.