Devon's Local
Furnace Financing
Company

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

Furnace size is determined by your home’s square footage, insulation, climate, and other factors. It’s best to consult with a professional technician who can perform a load calculation to determine the right size for your specific needs.
Oversized or undersized furnaces can lead to inefficiencies and comfort issues.

A furnace could stop working for a variety of reasons. Most commonly, furnaces stop working because of:

• Blocked or clogged vents, blowers, and/or ductwork
• A dirty, clogged filter
• Thermostat malfunctions (or just a low battery)
• Problem with your power supply
• Damage to the flue
• Issues with belts
• Problems with the pilot light
• Wiring issues

Winters in Edmonton, Alberta can be cold! Avoid layers upon layers of sweaters – if you’re experiencing any of the following issues, get your furnace repaired right away: 

• Strange smells, like burning or chemicals 
• You can’t turn the furnace on
• Inadequate and inconsistent heat. For example, some rooms are hotter than others and some rooms have no heat at all.
• Loud, banging or rattling noises

If you are in Edmonton and surrounding area, contact ProSolutions Inc, we’d love to be your HVAC company of choice. If you’re outside of our service area, contact a local furnace company with top ratings on Google.

You should consider replacing your furnace if it’s over 15-20 years old, requires frequent and costly repairs, produces uneven heating, or if your energy bills have been steadily increasing.

It’s also a good idea to upgrade to a more efficient model to save on long-term energy costs.

It shouldn’t take a professional heating company in Edmonton too long to install a new boiler. For a simple boiler replacement, you can expect a trained professional to take between 4 and 6 hours.

Your new boiler will be up and running in less than a day. However, installing a brand new boiler, where one didn’t exist before, is a bigger job. Upgrading your current boiler to a different system or moving your boiler to a new location can also be more involved and will take a bit longer.

Because these jobs are more complex, they may take a team of professionals a few days to complete. Typically, you can expect to wait no more than a week for your new system to be up and ready!

Shopping for a new furnace and wondering what are BTUs? BTU stands for British Thermal Unit – a value traditionally assigned to heat. Technically, a single BTU is the amount of energy that is necessary to increase the temperature of one pound of water by one degree Fahrenheit at sea level. As far as a heating system goes, BTUs refer to the amount of heat that a furnace is able to output.

When it comes to furnaces, the larger the square footage that needs to be heated, the more BTUs you’ll require. For example, it’s suggested that a 1,500 square foot home has a furnace that is able to output 45,000 to 90,000 BTUs.

Can’t decide if a furnace service plan is worth it? Beyond saving you time, money, and the headache of an unexpected furnace breakdown in the dead of winter, here are some of the benefits of a service plan:

• Identification of potential breakdowns before they occur
• Piece of mind and the ensured safety and comfort for you and your family
• Lower utility bills as a result of regular maintenance
• No premium fees for emergency service
• Automatically scheduled service – so you don’t have to worry about calling to book an appointment!
• Priority service
• Discounts on furnace services provided
• Professional services from trusted experts
• Satisfaction guarantee

Yes! If you’re a ProComfort Dual or ProHeating Member, you can upgrade your plan with our Air Filter Delivery Add-On—designed to make clean air easy and automatic.

Here’s how it works:

• You choose your filter size (we offer a variety to match your system)

• We deliver a full case of filters right to your door

• You set the delivery schedule based on your home’s needs—every few months, seasonally, or just once a year

Whether you’re dealing with allergies, pets, or just want to keep your system running efficiently, this add-on takes the guesswork out of remembering when to replace your filter. It’s one less thing on your list—and one more way we keep your home comfortable, year-round.