Edmonton's Preferred
Plumbing Service 
company

Installing a water softener doesn’t take too long when a professional technician is completing the installation. As long as no unforeseen setbacks or problems are encountered, a professional plumber should be able to install a water softener in about two to three hours. Choosing to have your water softener installed by an expert is a good idea, as this will ensure that it is installed and working properly, helping to prevent problems down the road. In addition, water softeners are available in various makes and models and an experienced technician can help you find the best system for your home and your family.

A sump pump is an appliance that is used to help prevent flooding in your home. If you’re in a flood zone and your basement floods regularly, if you have older plumbing, or if you just want to take a proactive step against flooding, then a sump pump installation is right for you. Sump pumps help prevent flood damage in your home by detecting increasing water pressure or water levels. If high levels are detected, the sump pump will pump water out of your basement and away from your home to a better location like a storm drain or a well.

In Edmonton, most hot water tanks last 8–12 years. If yours is:

• Taking too long to reheat

• Making rumbling or popping sounds

• Running out of hot water faster

• Leaking

• Over 10 years old

It may be time to upgrade before it fails!

Want to learn more? Book your free home estimate with our Home Comfort Advisor to talk about replacing your tank. They’ll walk you through your options as well as ways you can increase the longevity of your hot water tank for the future.

Tankless water heaters are the most energy-efficient hot water systems on the market. In fact, tankless water heaters can be approximately 35% – 80% more efficient than traditional hot water tanks. 

Tankless hot water heaters can be powered by electricity or gas. However, gas-powered tankless heaters are more efficient. In addition to being more energy-efficient, tankless water heaters cost less to operate (up to 50% less than traditional hot water tanks) and last longer (up to double the lifetime).

The plumbing professionals at ProSolutions PHAC recommend the following high-efficiency tankless water heater:

• Noritz EZ111 (Gas Powered)

Please note: Although tankless water heaters are the most energy-efficient hot water system, they are not for everyone. Our guide to tankless water heaters can help you decide if a tankless heater is the best option for your home.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

There are several reasons a faucet may drip or leak. Most commonly, a defective part will cause a faucet to drip. However, more serious problems can also be indicated by a dripping faucet. For example, if your plumbing is not properly maintained and regularly cleaned, corrosion can result, leading to leaky pipes and a leaking faucet. In addition, extreme changes in temperature, a shifting foundation, high water pressure, and intrusive tree roots can also cause pipes to leak. In order to fix a dripping faucet, you’ll first need to find the location of the leak. In some cases, the leak may be difficult to find. If the cause of your dripping faucet is not obvious, having a qualified plumber detect and repair the leak is vital, as it could result in costly damage to your home if left unrepaired. If you notice a leak, make sure to contact an emergency plumber in Edmonton as soon as possible to avoid further damage.

Salt should be refilled every 1 to 3 months, depending on your water usage, tank size, and family size. In Edmonton, with our harder water, most households check their salt monthly—especially during peak use seasons like winter.

A good rule of thumb: if the tank is less than half full, it’s time to top it up. But if that feels like one more thing to remember, our ProWater Softener Salt Membership makes it easy—we track your needs and deliver salt on a regular schedule, so your softener is always ready to go.

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.