Sherwood Park's Preferred
Plumbing Service 
company

Absolutely! ProSolutions Inc. specializes not only in repairing burst pipes but also in preventive measures. Our experienced technicians can inspect your plumbing system, identify potential problem areas, and provide solutions to prevent pipes from freezing and bursting.

Unfortunately, hot water heaters don’t last forever. On average, a traditional hot water heater will last about 8 to 10 years in Leduc. However, as this is based on the average lifespan, your tank may last only 7 years or it could last 11 or more with proper care and maintenance. The lifespan of a unit will depend on several factors including location, the type of water tank, water quality, the quality of installation, and how it is maintained. You can ensure that your hot water heater lasts as long as possible by scheduling regular hot water tank maintenance to ensure that it is in top working condition. Leduc plumbing services companies can help by providing Service Partner Plans and scheduled yearly water heater maintenance.

In colder climates, water inside the pipes can freeze. When water freezes, it expands, which can cause the pipe to crack or burst. This is especially common if the pipes are not properly insulated or if there are sudden drops in temperature.

Drain cleaners can be bad for pipes. This is particularly true for chemically costic drain cleaners. 

Chemical drain cleaners create a chemical reaction in your pipes. This results in heat being emitted. It is this heat that can be bad for your pipes. Older and plastic pipes, especially, can be damaged by chemical drain cleaners. If you have plastic pipes and you use a chemical cleaner, the heat may melt the plastic. This can result in leaks and further damage. As well, drain cleaners are not good for septic systems.

To avoid damaging your pipes, try another method of unclogging your pipe first. If you’re unsure, call a professional drain cleaning plumber services provider to help you get the job done right.

If your drain is clogged with hair, baking soda can dissolve hair in a drain. 

To try this safe and easy method at home – first, pour a cup of baking soda down the drain. Then pour a cup of vinegar (white vinegar) down. Allow the mixture to sit for several minutes. Keep an eye out for bubbling in the drain (this is caused by the reaction between the baking soda and vinegar). Once the bubbling stops, wait a few more minutes then pour some boiling water down the drain. Repeat until the clog is cleared. Keep at it, it can take a long time.

With a heavy-duty clog, you might need something more powerful. In this case, try snaking the drain, plunging it or calling a local Edmonton drain cleaning company to get the job done.

On average, sump pumps last about 10 years. As with any other appliance in your home, a sump pump can become damaged and may need to be replaced as it gets older or experiences more use. Unfortunately, unlike other appliances, it isn’t always obvious when a sump pump has reached the end of its life. In fact, this isn’t usually detected until the sump pump should be working but fails to do its job. In order to prevent your sump pump from failing when you need it most, it’s important to contact a professional plumber nearby to provide sump pump services if you notice that there is no water in the sump pit when your pump is running, if you see rust, if there is a musty or dank odour in your basement, if you hear strange noises coming from your sump pump or if the pump is failing to run automatically.

A sump pump is an appliance that is used to help prevent flooding in your home. If you’re in a flood zone and your basement floods regularly, if you have older plumbing, or if you just want to take a proactive step against flooding, then a sump pump installation is right for you. Sump pumps help prevent flood damage in your home by detecting increasing water pressure or water levels. If high levels are detected, the sump pump will pump water out of your basement and away from your home to a better location like a storm drain or a well.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.