Sherwood Park's Trusted
Tankless Water Heater Repair company

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

You can’t run out of hot water with tankless water heaters – unless, of course, the power supply is off or goes out. However, a tankless water heater can have trouble keeping up with demand if too many things require hot water all at once. For example, if several appliances are operating at the same time (the dishwasher, the laundry machine, etc.), and you go to have a hot shower, you may find that your tankless unit isn’t capable of providing enough hot water. Therefore, it’s important to ensure that you install a tankless water heater that has a large enough capacity to handle your demand for hot water.

ProSolutions Inc. understands the urgency of a burst pipe situation. We offer priority service for such emergencies, ensuring that our expert technicians reach your location promptly to mitigate damage and start the repair process. Call ProSolutions Inc. at 780-809-9617 for immediate assistance.

On average, sump pumps last about 10 years. As with any other appliance in your home, a sump pump can become damaged and may need to be replaced as it gets older or experiences more use. Unfortunately, unlike other appliances, it isn’t always obvious when a sump pump has reached the end of its life. In fact, this isn’t usually detected until the sump pump should be working but fails to do its job.

In order to prevent your sump pump from failing when you need it most, reach out to ProSolutions and ask us about our sump pump services. If you notice that there is no water in the sump pit when your pump is running, if you see rust, if there is a musty or dank odour in your basement, if you hear strange noises coming from your sump pump or if the pump is failing to run automatically.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

Changing your water softener salt is simple: just lift the lid on the brine tank and pour new salt directly into the tank—no need to remove old salt unless it’s hardened or formed a crust (called bridging). Use a high-quality softener salt and avoid overfilling; aim to keep it about half to three-quarters full.

Not a fan of hauling heavy bags? Our ProWater Softener Membership takes care of everything—we pick up, deliver, and even fill your tank for you. You’ll never have to worry about doing it yourself again.

There are several reasons a faucet may drip or leak. Most commonly, a defective part will cause a faucet to drip. However, more serious problems can also be indicated by a dripping faucet. For example, if your plumbing is not properly maintained and regularly cleaned, corrosion can result, leading to leaky pipes and a leaking faucet. In addition, extreme changes in temperature, a shifting foundation, high water pressure, and intrusive tree roots can also cause pipes to leak. In order to fix a dripping faucet, you’ll first need to find the location of the leak. In some cases, the leak may be difficult to find. If the cause of your dripping faucet is not obvious, having a qualified plumber detect and repair the leak is vital, as it could result in costly damage to your home if left unrepaired. If you notice a leak, make sure to contact an emergency plumber in Edmonton as soon as possible to avoid further damage.

If your drain is clogged with hair, baking soda can dissolve hair in a drain. 

To try this safe and easy method at home – first, pour a cup of baking soda down the drain. Then pour a cup of vinegar (white vinegar) down. Allow the mixture to sit for several minutes. Keep an eye out for bubbling in the drain (this is caused by the reaction between the baking soda and vinegar). Once the bubbling stops, wait a few more minutes then pour some hot water down the drain. Repeat until the clog is cleared. Keep at it, it can take a long time.

With a heavy-duty clog, you might need something more powerful. In this case, try snaking the drain, plunging it or calling a local Edmonton drain cleaning company to get the job done. 

ProSolutions no longer provides drain cleaning services, however we are happy to help if you decide to replace your fixtures!