St. Albert's Local
Furnace Financing
Company

Shopping for a new furnace and wondering what are BTUs? BTU stands for British Thermal Unit – a value traditionally assigned to heat. Technically, a single BTU is the amount of energy that is necessary to increase the temperature of one pound of water by one degree Fahrenheit at sea level. As far as a heating system goes, BTUs refer to the amount of heat that a furnace is able to output.

When it comes to furnaces, the larger the square footage that needs to be heated, the more BTUs you’ll require. For example, it’s suggested that a 1,500 square foot home has a furnace that is able to output 45,000 to 90,000 BTUs.

There are several heating systems to choose from, including:

• Gas Furnaces: These are efficient and widely used for their affordability and heating capabilities.
• Electric Furnaces: These are suitable for areas with milder winters but tend to be less energy-efficient.
• Heat Pumps: They can both heat and cool your home, providing year-round comfort.
• Hybrid Systems: Combining a heat pump and a gas furnace for maximum efficiency in different weather conditions.
• Ductless Mini-Splits: Ideal for heating individual rooms or spaces without a central duct system.

A furnace could stop working for a variety of reasons. Most commonly, furnaces stop working because of:

• Blocked or clogged vents, blowers, and/or ductwork
• A dirty, clogged filter
• Thermostat malfunctions (or just a low battery)
• Problem with your power supply
• Damage to the flue
• Issues with belts
• Problems with the pilot light
• Wiring issues

Winters in Edmonton, Alberta can be cold! Avoid layers upon layers of sweaters – if you’re experiencing any of the following issues, get your furnace repaired right away: 

• Strange smells, like burning or chemicals 
• You can’t turn the furnace on
• Inadequate and inconsistent heat. For example, some rooms are hotter than others and some rooms have no heat at all.
• Loud, banging or rattling noises

If you are in Edmonton and surrounding area, contact ProSolutions Inc, we’d love to be your HVAC company of choice!

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

If you live in Edmonton or other northern areas your furnace should be professionally serviced once per year. This will prevent you from having to get expensive furnace repairs or replacements and will extend the life of your furnace. In fact, regularly scheduled inspections and service on your heating system can help identify potential breakdowns and reduce emergency repairs by as much as 95%! Regular service can also lower utility bills by up to 30%.

Harsh winters in Edmonton, and other Albertan cities, can take a toll on heating systems. A company that provides furnace service and maintenance will ensure that everything is in top working condition so that you can rely on your furnace all through the winter without having to worry about issues or failures.

Here’s how much furnace tune-ups & servicing costs in Edmonton.

Unless you’re a trained professional, it’s not a good idea to attempt to install your own furnace. Yes, you’ll save money now but the issues and damage that can occur from an improperly installed furnace can result in costs far beyond what you would have spent to hire professionals to do your install. 

Hiring a professional heating services provider in your area to install, maintain, and repair your furnace is always the best way to go. This will save you time and money in the long run. In addition to properly installing and calibrating your new furnace system, technicians are trained to help you find the perfect size furnace for your home. This will ensure that your furnace is not too big or too small. This, as well as the additional services provided by professional technicians during installation, including the calibration of your thermostat, will result in a highly-efficient furnace that will save you money in energy costs.

A modern, high-efficiency furnace should last approximately ten to fifteen years. This is based on the average lifespan of a furnace so it is possible that yours may last longer or need to be replaced sooner. 

The key to a long-lasting furnace is regular maintenance and upkeep. It’s important to stay on top of minor furnace repairs, tune-ups, and maintenance. Scheduling regular maintenance with a professionals heating company will help to maximize the life of your furnace and minimize the need for major repairs. This is especially true in Alberta, where cold winters can take a toll on your furnace.

A local furnace company will know how to care for your furnace in this climate and what to look for if it is having issues.

The key to knowing when to replace your furnace versus when to repair it depends on its age and how many more years you can expect it to last. But, rather than humming and hawing about these questions, there is a simple equation you can use to help you decide.

This equation compares the cost of repairing the unit to the cost of replacing it. Here’s the calculation you can use to decide when you should replace your furnace:

“Cost of Repair” x “Age of Unit (in years)” > “Cost to Replace Furnace” = Replace Furnace

Multiply the cost of the furnace repair by the age of the unit. If this number is less than the cost of replacing your gas furnace, then opt for the repairs. If this number is larger, it will be cheaper to replace the furnace.

If you’re living in Alberta, in the St. Albert/Edmonton area, and you’re still unsure, talk to a local heating company. With their expert knowledge about your particular climate, they will be able to help you make a decision as to whether you should repair or replace your furnace.