On average, sump pumps last about 10 years. As with any other appliance in your home, a sump pump can become damaged and may need to be replaced as it gets older or experiences more use. Unfortunately, unlike other appliances, it isn’t always obvious when a sump pump has reached the end of its life. In fact, this isn’t usually detected until the sump pump should be working but fails to do its job.
In order to prevent your sump pump from failing when you need it most, reach out to ProSolutions and ask us about our sump pump services. If you notice that there is no water in the sump pit when your pump is running, if you see rust, if there is a musty or dank odour in your basement, if you hear strange noises coming from your sump pump or if the pump is failing to run automatically.
Yes! With our ProWater Softener Membership, we don’t just deliver salt—we pick it up, bring it to your home, and fill your tank for you. Whether you prefer a small monthly fee or a discounted annual plan, we tailor your delivery schedule based on your softener’s usage and your household’s needs.
Plus, if your system ever needs service, our team is ready to help—whether it’s our technicians, shop crew, or installers, we’ll send the right person for the job based on your maintenance history and availability.
The time it takes to repair a burst pipe can vary based on the location and severity of the break. A simple repair might take a few hours, while more complex situations could require several days. Water damage restoration, depending on the extent of the damage, can take anywhere from a few days to several weeks. It’s crucial to address water damage promptly to prevent mold growth and further structural issues.
Remember, in the event of a burst pipe, it’s essential to act quickly to minimize damage and ensure the safety of everyone in the home.
In Edmonton, you can expect to pay approximately $3,000 – $7,000 for a new water heater to be installed. This estimate includes the price of a high quality hot water tank, as well as installation. Keep in mind, the cost to have a professional Edmonton plumbing services provider install a water heater in your home will depend on the complexity of the installation, and the hot water tank you choose to purchase. For a simple job in which one hot water tank is being replaced by a new tank of the same type, the labour costs will not be too high. However, if you are having a hot water heater installed in a new location or in a home that does not currently have one, you will be looking at a more difficult job and therefore a higher price.
Common reasons include:
Failed heating element (electric)
Faulty gas control valve
Sediment buildup inside the tank
Aging equipment (8–12+ years old)
Undersized tank for your household
If your showers are turning cold halfway through, your tank might be telling you something!
Our team can help you find the true issue behind your water heater taking it’s sweet time. Give us a shout and learn about your hot water tank options, and learn the difference between a hot water tank and a tankless hot water system.
First, shut off the main water supply to prevent further damage. If the burst pipe is near any electrical outlets or appliances, turn off the electricity at the breaker box. Avoid standing in water to prevent electrical shock. Once you’ve secured the area, call a professional plumbing company to assess and repair the damage.
In colder climates, water inside the pipes can freeze. When water freezes, it expands, which can cause the pipe to crack or burst. This is especially common if the pipes are not properly insulated or if there are sudden drops in temperature.
Sump pumps need annual maintenance. Like other appliances in your home, a sump pump should be maintained and serviced on a yearly basis. In some cases, more maintenance may be required. It is important to stay on top of sump pump maintenance in order to prevent a disaster. Oftentimes, homeowners will not notice that their sump pump isn’t working until it’s too late. Suddenly, when the sump pump is required, the homeowner discovers that it isn’t working as it should be. Many professional plumbing contractors provide Service Partner Plans that can help you properly maintain your appliances. An annual maintenance plan like this will ensure that your sump pump is always in top working condition.
Water softeners last about 10 to 20 years. The lifetime of your water softener will depend on several factors including the type of water softener and brand you buy, as well as the installation. Proper installation is important to ensure maximum effectiveness and lifetime. One of the many benefits of having a water softener installed in your home is that it will extend the lifetime of your other plumbing appliances. Hard water is tough on appliances like water heaters and laundry machines, as the minerals in the water wear away pipe sealants over time causing leaks and clogs. However, a water softener will remove excessive mineral content from all of the water, helping to protect your plumbing and appliances from unnecessary damage.
The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.
Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.
On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.
Salt should be refilled every 1 to 3 months, depending on your water usage, tank size, and family size. In Edmonton, with our harder water, most households check their salt monthly—especially during peak use seasons like winter.
A good rule of thumb: if the tank is less than half full, it’s time to top it up. But if that feels like one more thing to remember, our ProWater Softener Salt Membership makes it easy—we track your needs and deliver salt on a regular schedule, so your softener is always ready to go.
It can cost anywhere from $3,500 to $5,500 to get a water softener installed in your home. This estimate includes the price of the unit as well as installation. The total cost will range depending on several factors including the type of water softener you choose, the softener’s capacity, the size of your home and the difficulty of the installation. In order to avoid unnecessary costs down the road, it’s important that you have your water softener installed by an expert. Water softener installation in Edmonton is ideal, especially if you are constantly having to deal with soap scum and limescale buildup or you want to increase the longevity of your household appliances that use water.
