Ft. Saskatchewan's Local
Boiler Installation
Company

Furnace on the fritz? Here are a few things to check if your furnace isn’t working:

• Power switch – is the power on? If so, try turning the furnace off and then on again.
• Furnace filter – check to see if the filter is clogged. If it is, exchange it for a new one. You should be changing your furnace filter ever 3 months.
• Batteries in the thermostat – check the batteries in your thermostat and replace them if they’re low.
• Flame sensor – turn off the power to your furnace (this is an important first step) then remove the sensor and clean it.
• Pilot light – check to make sure the pilot light is on. If it’s out, relight it using your furnace model’s igniting instructions.
• Air intake and exhaust pipes – check the exhaust flue for blockages and clear any blockage you find. For example, during the winter in Alberta, you might find icicles covering the screen of the flue. Remove these to solve the problem.

If one of these is not the issue, you may need a professional to help you uncover and solve the problem. Don’t wait until it’s too late – a broken furnace, especially during an Edmonton winter, can result in broken and burst water pipes! Find a local furnace repair contractor to fix the problem as soon as possible.

It typically takes between four and eight hours to install a new furnace in Edmonton or the surrounding areas. However, install time can vary depending on factors like the age of your home and the condition of its wiring and ductwork. 

No need to worry about spending a long night freezing inside your home during an Albertan winter. A professional furnace company can have your new furnace up and running within a day to keep you and your family comfortable and warm!

When getting free furnace installation quotes in Edmonton area, make sure to ask how long the installation is expected to take. Local furnace companies will have a good idea based on their experience in your area.

It can cost anywhere from $150 to $1,500 to repair a furnace, depending on the issue. If you’re in the Edmonton area, the average cost to repair a furnace will be around $700.

Make sure the furnace company you choose to do your repairs is upfront with their pricing. They should be able to provide you with the price ahead of time so that you know exactly what to expect before moving ahead!

Want to save some money? Often professional heating and plumbing companies will offer a Service Partner Plan – we call ours the ProComfort Plan. This type of plan will help you keep on top of the regular maintenance your furnace needs for a fraction of the price. Regular furnace tune-ups and maintenance will help prevent any major issues, saving you from repairs and replacements that could cost you thousands of dollars! With plans like this, there is often a discount for members, meaning you’ll save money with every visit.

There are several steps involved in installing your new furnace. These steps will vary depending on the furnace you choose, your home’s existing furnace system, and any changes you want.

1. Align the new furnace with existing gas lines and ductwork
2. Connect and seal to the ducting system
3. Connect intake and exhaust pipes
4. Connect the gas line
5. Connect the furnace to the electrical supply and thermostat
6. Connect the furnace to a drain hole

At this point, it’s important to check your work, make sure everything is connected properly and there are no gas leaks. 

Please note: these steps are extremely simplified and meant to provide an overview to understand the professional furnace installation process better. It is highly recommended that you have your furnace professionally installed in order to avoid dangerous problems and issues with your new furnace. Having to get furnace repairs on your new unit would not be covered under warranty without professional installation.

Hiring a professional will be more costly initially but will save you money in the long run.

Here’s how long it takes to install a new furnace.

Boiler heat is not expensive on a day-to-day basis. In fact, you may save in energy costs when heating your house with a boiler compared to a furnace.

However, installing a boiler is typically more complex and therefore more expensive than installing a furnace. On average, a boiler will cost anywhere from $2,500 to $10,000 to purchase and install (depending on the brand and the system’s energy efficiency rating). Plus, your home will need extensive modifications to make a boiler system work – radiant heating must be implemented.

On the other hand, the average cost to buy and install a furnace in Edmonton is only $5,500 to $10,000+. With boiler heat, you will save in the long run but will have to pay more upfront.

There are several heating systems to choose from, including:

• Gas Furnaces: These are efficient and widely used for their affordability and heating capabilities.
• Electric Furnaces: These are suitable for areas with milder winters but tend to be less energy-efficient.
• Heat Pumps: They can both heat and cool your home, providing year-round comfort.
• Hybrid Systems: Combining a heat pump and a gas furnace for maximum efficiency in different weather conditions.
• Ductless Mini-Splits: Ideal for heating individual rooms or spaces without a central duct system.

The average cost to install a furnace in Edmonton is between $5,500 and $10,000+. The cost depends on various factors, including brand, size, company, etc. However, with the average cost of a new furnace being around $3,000 – $6,000, you can expect to pay anywhere from $5,000 to $10,000 in total, including installation. 

Check out our Current Offers to see how you can save with deals and rebates. 

In Alberta, a heat-loss calculation must be done when installing a new furnace. When hiring a professional to do your install, this will be factored into the price.

Hiring a professional heating company to install your furnace is essential. It may cost more initially but will save you money, time, and headache in the long run.

You should consider replacing your furnace if it’s over 15-20 years old, requires frequent and costly repairs, produces uneven heating, or if your energy bills have been steadily increasing.

It’s also a good idea to upgrade to a more efficient model to save on long-term energy costs.