Leduc's Preferred
Plumbing Service 
company

On average, sump pumps last about 10 years. As with any other appliance in your home, a sump pump can become damaged and may need to be replaced as it gets older or experiences more use. Unfortunately, unlike other appliances, it isn’t always obvious when a sump pump has reached the end of its life. In fact, this isn’t usually detected until the sump pump should be working but fails to do its job. In order to prevent your sump pump from failing when you need it most, it’s important to contact a professional plumber nearby to provide sump pump services if you notice that there is no water in the sump pit when your pump is running, if you see rust, if there is a musty or dank odour in your basement, if you hear strange noises coming from your sump pump or if the pump is failing to run automatically.

You can’t run out of hot water with tankless water heaters – unless, of course, the power supply is off or goes out. However, a tankless water heater can have trouble keeping up with demand if too many things require hot water all at once. For example, if several appliances are operating at the same time (the dishwasher, the laundry machine, etc.), and you go to have a hot shower, you may find that your tankless unit isn’t capable of providing enough hot water. Therefore, it’s important to ensure that you install a tankless water heater that has a large enough capacity to handle your demand for hot water.

The strongest drain cleaner is an acidic drain cleaner. When you have a clogged drain, it’s always best to try snaking or plunging it first. This method will ensure you do not damage your pipes. If that fails, give a drain cleaning product a try (at your own risk). 

Different types of drain cleaners have different uses. When you have a tough clog – hair, food, grease, soap scum, paper – an acidic drain cleaning product will be your best bet.

Keep in mind that you should never use chemical drain cleaning products in a completely clogged drain. These types of clogs require the product to sit in the drain for an extended period and this can cause damage to your pipes.
If a drain cleaning product doesn’t cut it, plumbing contractors in Edmonton can help. Contact a local, experienced plumber to have your drains unclogged and working like new in no time.

Not all plumbing issues require immediate attention. However, there are several common problems that should be addressed as quickly as possible. Issues that count as a plumbing emergency including burst pipes, frozen pipes, clogged toilets, leaky faucets, and no hot water. Although some of these issues can be addressed quickly by the homeowner, others may require the immediate attention of a qualified professional plumber. If you believe you have a plumbing emergency, there are several emergency plumbers in Edmonton that you can contact. When seeking emergency plumbing services, be sure to ask the plumber if you will be paying a premium price for their emergency services. Professional plumbing companies, like ProSolutions Plumbing, Heating & Air Conditioning, will provide upfront pricing and will not charge premium emergency prices.

The amount of time it takes to get hot water from a new water heater depends on the size and type of hot water heater. A properly and professionally installed gas hot water heater will provide hot water most quickly. An average 40-gallon heater will only take about 30 to 40 minutes to provide heat water, while you can expect hot water from a larger tank (80-gallons) in approximately 60 to 70 minutes. Electric hot water tanks, on the other hand, will take a little longer. For an average 40-gallon electric heater it will take about 60 to 80 minutes and for an 80-gallon tank about 2 hours.

The best homemade drain cleaner is baking soda. Baking soda can be used along with vinegar or lemon juice to create a strong and effective homemade drain cleaner that is safe for your home’s pipes.

To unclog your drains using baking soda and vinegar or lemon juice, pour one cup of baking soda then one cup of white vinegar or lemon juice down the drain. Allow this to sit for an hour then pour down a few cups of boiling water. If this doesn’t work the first time, repeat as necessary.

If your homemade drain cleaner isn’t working, call an experienced provider of drain cleaning plumbers near you to take a look. A professional plumber will be able to determine what is causing the clogged drain and how to fix it.

There are several reasons a faucet may drip or leak. Most commonly, a defective part will cause a faucet to drip. However, more serious problems can also be indicated by a dripping faucet. For example, if your plumbing is not properly maintained and regularly cleaned, corrosion can result, leading to leaky pipes and a leaking faucet. In addition, extreme changes in temperature, a shifting foundation, high water pressure, and intrusive tree roots can also cause pipes to leak. In order to fix a dripping faucet, you’ll first need to find the location of the leak. In some cases, the leak may be difficult to find. If the cause of your dripping faucet is not obvious, having a qualified plumber detect and repair the leak is vital, as it could result in costly damage to your home if left unrepaired. If you notice a leak, make sure to contact an emergency plumber in Edmonton as soon as possible to avoid further damage.

In colder climates, water inside the pipes can freeze. When water freezes, it expands, which can cause the pipe to crack or burst. This is especially common if the pipes are not properly insulated or if there are sudden drops in temperature.