Stony Plain's Trusted
Emergency Plumber company

If you’ve just used a lot of hot water, a typical gas hot water tank may start producing usable hot water again in 20–30 minutes, with full recovery in about 45 minutes.

Electric tanks usually take longer – often 45–90 minutes.

If your tank takes hours to recover, it may need servicing… or it may be time to replace it. Not sure which? We can help! Reach out today.

Salt should be refilled every 1 to 3 months, depending on your water usage, tank size, and family size. In Edmonton, with our harder water, most households check their salt monthly—especially during peak use seasons like winter.

A good rule of thumb: if the tank is less than half full, it’s time to top it up. But if that feels like one more thing to remember, our ProWater Softener Salt Membership makes it easy—we track your needs and deliver salt on a regular schedule, so your softener is always ready to go.

A sump pump is an appliance that is used to help prevent flooding in your home. If you’re in a flood zone and your basement floods regularly, if you have older plumbing, or if you just want to take a proactive step against flooding, then a sump pump installation is right for you. Sump pumps help prevent flood damage in your home by detecting increasing water pressure or water levels. If high levels are detected, the sump pump will pump water out of your basement and away from your home to a better location like a storm drain or a well.

ProSolutions Inc. stands out due to our commitment to fast and reliable service, especially in emergencies like burst pipes. With over 30 years of experience in Edmonton, our trained residential plumbers are equipped with advanced tools and technology to handle burst pipe repairs efficiently. Plus, our upfront pricing ensures no hidden costs, and our no overtime fee policy guarantees affordability even in emergencies.

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

Tankless water heaters are the most energy-efficient hot water systems on the market. In fact, tankless water heaters can be approximately 35% – 80% more efficient than traditional hot water tanks. 

Tankless hot water heaters can be powered by electricity or gas. However, gas-powered tankless heaters are more efficient. In addition to being more energy-efficient, tankless water heaters cost less to operate (up to 50% less than traditional hot water tanks) and last longer (up to double the lifetime).

The plumbing professionals at ProSolutions PHAC recommend the following high-efficiency tankless water heater:

• Noritz EZ111 (Gas Powered)

Please note: Although tankless water heaters are the most energy-efficient hot water system, they are not for everyone. Our guide to tankless water heaters can help you decide if a tankless heater is the best option for your home.

In colder climates, water inside the pipes can freeze. When water freezes, it expands, which can cause the pipe to crack or burst. This is especially common if the pipes are not properly insulated or if there are sudden drops in temperature.

There are several reasons a faucet may drip or leak. Most commonly, a defective part will cause a faucet to drip. However, more serious problems can also be indicated by a dripping faucet. For example, if your plumbing is not properly maintained and regularly cleaned, corrosion can result, leading to leaky pipes and a leaking faucet. In addition, extreme changes in temperature, a shifting foundation, high water pressure, and intrusive tree roots can also cause pipes to leak. In order to fix a dripping faucet, you’ll first need to find the location of the leak. In some cases, the leak may be difficult to find. If the cause of your dripping faucet is not obvious, having a qualified plumber detect and repair the leak is vital, as it could result in costly damage to your home if left unrepaired. If you notice a leak, make sure to contact an emergency plumber in Edmonton as soon as possible to avoid further damage.