Stony Plain's Trusted
Sump Pump Installation company

The difference between a boiler and a hot water tank has to do with the way in which each uses the hot water that it produces.

Both boilers and hot water tanks take cool water, heat this water and then distribute it throughout a home via pipes. However, the water that is heated by a boiler is distributed throughout the home via pipes, radiators and radiant in-floor systems in order to heat it – to keep the rooms, floors, garage, etc. comfortable and warm.

On the other hand, a hot water tank heats water that is used for cooking and cleaning purposes – for showers, dishwashing, laundry, etc.

Absolutely! ProSolutions Inc. specializes not only in repairing burst pipes but also in preventive measures. Our experienced technicians can inspect your plumbing system, identify potential problem areas, and provide solutions to prevent pipes from freezing and bursting.

In colder climates, water inside the pipes can freeze. When water freezes, it expands, which can cause the pipe to crack or burst. This is especially common if the pipes are not properly insulated or if there are sudden drops in temperature.

Installing a water softener doesn’t take too long when a professional technician is completing the installation. As long as no unforeseen setbacks or problems are encountered, a professional plumber should be able to install a water softener in about two to three hours. Choosing to have your water softener installed by an expert is a good idea, as this will ensure that it is installed and working properly, helping to prevent problems down the road. In addition, water softeners are available in various makes and models and an experienced technician can help you find the best system for your home and your family.

In Edmonton, you can expect to pay approximately $3,000 – $7,000 for a new water heater to be installed. This estimate includes the price of a high quality hot water tank, as well as installation. Keep in mind, the cost to have a professional Edmonton plumbing services provider install a water heater in your home will depend on the complexity of the installation, and the hot water tank you choose to purchase. For a simple job in which one hot water tank is being replaced by a new tank of the same type, the labour costs will not be too high. However, if you are having a hot water heater installed in a new location or in a home that does not currently have one, you will be looking at a more difficult job and therefore a higher price.

It can cost anywhere from $3,500 to $5,500 to get a water softener installed in your home. This estimate includes the price of the unit as well as installation. The total cost will range depending on several factors including the type of water softener you choose, the softener’s capacity, the size of your home and the difficulty of the installation. In order to avoid unnecessary costs down the road, it’s important that you have your water softener installed by an expert. Water softener installation in Edmonton is ideal, especially if you are constantly having to deal with soap scum and limescale buildup or you want to increase the longevity of your household appliances that use water.

Tankless water heaters are the most energy-efficient hot water systems on the market. In fact, tankless water heaters can be approximately 35% – 80% more efficient than traditional hot water tanks. 

Tankless hot water heaters can be powered by electricity or gas. However, gas-powered tankless heaters are more efficient. In addition to being more energy-efficient, tankless water heaters cost less to operate (up to 50% less than traditional hot water tanks) and last longer (up to double the lifetime).

The plumbing professionals at ProSolutions PHAC recommend the following high-efficiency tankless water heater:

• Noritz EZ111 (Gas Powered)

Please note: Although tankless water heaters are the most energy-efficient hot water system, they are not for everyone. Our guide to tankless water heaters can help you decide if a tankless heater is the best option for your home.

There are several reasons a faucet may drip or leak. Most commonly, a defective part will cause a faucet to drip. However, more serious problems can also be indicated by a dripping faucet. For example, if your plumbing is not properly maintained and regularly cleaned, corrosion can result, leading to leaky pipes and a leaking faucet. In addition, extreme changes in temperature, a shifting foundation, high water pressure, and intrusive tree roots can also cause pipes to leak. In order to fix a dripping faucet, you’ll first need to find the location of the leak. In some cases, the leak may be difficult to find. If the cause of your dripping faucet is not obvious, having a qualified plumber detect and repair the leak is vital, as it could result in costly damage to your home if left unrepaired. If you notice a leak, make sure to contact an emergency plumber in Edmonton as soon as possible to avoid further damage.